Skip to end of metadata
Go to start of metadata


When connecting BI4.0 through the Information Design Tool a relational connection is created with a Java Connector (JCO) to the SAP Netweaver Business Warehouse (BW.)  When a connection is created in IDT it automatically generates an RFC connection.  The connection has limitations and a manual configuration can be implemented.


This is a review of what is needed to configure an RFC connection and the issues that may be considered.

Why Should a change occur in the Auto-Generated RFC connection?

Issue 1:  Connection limits

In BI a JCO connection is created through the client tool Information Design Tool (IDT) to connect to the SAP Netweaver BW data.  Once a connection is created BI can auto-generate an RFC destination on the BW side.  This feature allows a user to connect and read data for reporting.  The RFC is generated with the name of BI CMS and an unique number o through 9.  With each connectionit incrementally increases by one until it reaches 10.  The RFC destinations should then be cleared out and deleted and the process starts over.  However, sometimes on the tenth connection the request for connection is refused with an error such as

 “BI server cannot reach a callback Server on this host. Make sure that the resource property "callbackServerProgramID" is correctly set.”

The connections should be automatically deleted.  Before considering manual configuration to one RFC destination, consider why the automatic connection removal is not being implemented.  Are there authorizations to be evaluated? 

 These connections can be manually deleted by the following steps:

  • Log onto SAPGUI
  • Execute 'sm59' and open the 'TCP/IP connections' folder.
  • Observe multiple RFC connections of the form DF_JCO_<HOSTNAME>_<INTEGER> where the <HOSTNAME> represents the machine connecting to the BW system.
  • Delete the RFC connection that are unused

Issue 2:  To Avoid setting authorizations create/change for every user.

The authorizations required for defining a connection against BW include the following:

S_RFC                   (Authorization Check for RFC Access)

S_RS_ADMWB    (Data Warehousing Workbench - Objects)

S_RS_AUTH         (BI Analysis Authorizations in Role)

S_RS_ICUBE        (Data Warehousing Workbench - InfoCube)

S_RS_IOBJ           (Data Warehousing Workbench - InfoObject)

S_RS_ISET           (Data Warehousing Workbench - InfoSet)

S_RS_MPRO        (Data Warehousing Workbench - MultiProvider)

S_RS_ODSO        (Data Warehousing Workbench - DataStore Object)

To avoid giving every SAP user who will use this JCO connections the create/change authorization on S_RFC_ADM.  The manual callback ID only requires the authorization S_RFC_ADM Administration for RFC-Destinations and this connection is then used for all users.

If Authorizations are not properly set you may see the error:

     Could not generate a callback program ID: (73) You have no authorization to change
destination DF_JCO_[BI_APS]-X1_0

For more in depth information about authorization, Click Here

Issue 3:  There is a message server

Issue 4:  The BI environment is Clustered

Issue 5: Is there a bottleneck? 


How to Manually Configuring the RFC connection

There are three parts to the manual configuration.  The RFC destination is created in the BW environment.  The connection is created in the IDT and the Mapping Properties are synchronized in the DFAT. 

Consider the configuration environment. How many environments are being implemented? 

  1. Log into the Central Management Console (CMC) and View the Servers List. 
  2. Select Server Categories and then the Data Federation Service.  This will list the BI AdaptiveProcessingServer (APS) that contains the Data Federator Service.  This is the service that manages the read function from BW.  
  3. Right Click and select Properties
  4. Collect the public "Server Name" APS name. This is the name at the top of the dialog.  If you have more than one server you will need to collect the name of each of them.
  5. where BIPW12R2 is the host name
  6. and AdaptiveProcessingServer is the APS namethat contains the Data Federator Service

Special Notes:

The APS name should never contain any spaces!

The BW Configuration

1. Open SAP Logon and log on to the SAP system with SAP_ALL or theS_RFC_ADM

2. Enter SE37 in the transaction text field and click execute.

3. This opens the parameter panel. Enter function module RSDRI_DF_CONFIGURE click execute.

4. Set the parameters as follows: 










  For the second parameter, replace hostname with the hostname where the BOE CMS name and some unique id as a unique system identifier, to differentiate between potential multiple connections.  Do not use special characters, periods or dashes.  Do not use the single digit numbers 0-9.(These are reserved numbers for BI autogenerated connections and may create a conflict.)


For example, we will use DF_JCO_BIPW12R2_99 is a unique identifier that we can reuse later.

5. Execute the module.

6. Run SM59, check the TCP/IP connections, you will notice that the DF_JCO_BIPW12R2_99 has been generated.

7. Double Click on the RFC Destination and check the Technical Tab for that the gateway host and gateway service are correctly formed.



The Information Design Tool Connection


1. In IDT logon to the repository resources and create a new relational connection

2. Select SAP Netweaver BW JCO connector

3. Enter the credentials for your BW System

4. Do not test

5. Check the box under Optional Parameters for Custom Program ID Mapping.

Use the RFC destination defined above and the name of the BI AdaptiveProcessServer (that contains a Data Federation Service) The entry should look like this: BIPW12R2.AdaptiveProcessingServer=DF_JCO_BIPW08R2_99

6. Check the Box Use Custom Gateway and add the fully qualified domain name for the Gateway Host and add the Gateway Service Name

7.Select an InfoProvider and DO NOT test the connection

8. Click Finish ( You are prompted for a shortcut and you can say yes if you have a project folder ready otherwise say no)


Synchronizing the Connector Data Federator Administration Tool



1. Open the Data Federation Administration Tool with a BI Administrator account

2. Go to the Connector Configuration tab, right click the JCO connection, select create configuration

3. These values must be identical to those entered in IDT :  BIPW12R2.AdaptiveProcessingServer=DF_JCO_BIPW08R2_99

(Special Note in Version 4.0 these parameter configuration can only exist in DFAT and not IDT connection)

4. In the gatewayServiceName enter the gateway name example:  sapgw00 (This is listed in the RFC destination Tachnical Tab above)

5. In the property gatewayHostname type in the Fully qualified domain name of the BW server

6. In the jcoServerProperties, assign the following value: jco.server.connection_count=10

7. In the jcoDestinationProperties, assign the following value: jco.destination.pool_capacity =10;jco.destination.expiration_time=600000;jco.destination.peak_limit=10

NOTE: The steps mentioned in Data Federation Administration Tool must be performed, otherwise connection creation is not finished, despite the connection has created in Information Design Tool. Note also, the connection test can be performed in Information Design Tool, after the steps has been performed in Data Federation Administration Tool.

8. Save the Connector Configuration (Top Right save icon)




9. Once the Configuration has been saved, click double the connection. It should retrieve the the BW, JCo versions.

How to Configure In a Clustered Environment

1. Edit the IDT relational connection to BW

2. In the Custom property programIDMapping, point the JCO connection to use the RFC destination.

4. Add the entries seperated by a semi-colon. 

5. Each distinct AdaptiveProcessingServer (APS) Server must be mapped to a distinct RFC destination.

6. Synchronize the DFAT connector configuration.

For instance, (Cluster with 2 nodes), the entry for the parameter programIDMapping would be:


MySia1 is the name of the first node from the cluster and AdaptiveProcessingServer1 is the name of the AdaptiveProcessingServer running

MySia2 is the name of the second node from the cluster and AdaptiveProcessingServer2 is the name of the AdaptiveProcessingServer running on MySia2


Configuration to Eliminate the BottleNeck Created By Using Only One Connection 

Set up multiple RFC destinations and assign them to each Data Federator APS server in the following manner (assuming you have 2 DF Query Servers each on 2 different processing tier nodes):

- After setting up 2 APS servers on each of the 2 processing tier nodes, note the names of each server. These names are listed in the BI CMC under the “Servers” -> “Data Federation Servers” section. For example:
         SIA1.DFServerA      SIA1.DFServerB       SIA2.DFServerC      SIA2.DFServerD

- Each RFC destination can only be used with one DF server. Create each destination according to the following naming scheme, and set the Program ID equal to the destination name:          DF_JCO_<hostname>_<server_ID>

For instance:
         DF_JCO_SIA1_A      DF_JCO_SIA1_B      DF_JCO_SIA2_C      DF_JCO_SIA2_D

- For every BW datasource listed, modify the parameter “programIDMapping” to link each DF APS to its RFC destination. Refer to the Data Federation Administration Tool Guide section 4.5.1 for more details on the syntax of this field.

- In the example above with 4 DF query servers, you would set “programIDMapping” equal to the following string:

This will bind each of your four Data Federator services in each APS to their defined RFC destinations.

You should also increase the concurrency of the connector itself.  The default value is 2 concurrent connections on one JCO connection to one RFC destination.  You can safely increase this up to 10.

 For more in depth information about scalability, Click Here

BW Configuration Notes

In BW an RFC destination of the type TCP/IP connection must exist in transaction SM59. We recommend the naming convention DF_JCO_<HOST OF DF_some sid#>, as described above. The activation type must be "Registered Server Program", and the program ID must be the same as the RFC destination.

When the DataSource is configured in the Data Federator, the name of the gateway host is read from BW. This host name should be the fully qualified DNS name

For example: instead of just myserver

If the DNS name is not fully qualified, change the parameter "rdisp/mshost" to the fully qualified name in BW using transaction RZ11.

Connecting to a Message Server

Connecting via message server

1. Launch transaction SE37.

2. Run function RSDRI_DF_CONFIGURE.

3. Configure the callback (use the host name of the BI server to avoid confusion) and clear the top and bottom fields (I_ONLY_CHECK).

4. Execute and launch SM59 to verify that:

5. The right Gateway Host is selected.

6. The message server is picked up automatically since it is configured.

7. Alternative, the application server is used as the gateway host.

8.. The right gateway service is selected.

9. This can be the application gateway service, which defaults to the system number e.g. sapgw02 where system number is "02".

10. It is recommended to use the gateway service of the message server

Connecting to a message server in a deployment comprising of a message server and two or more application servers

1. Create manual callback (RFC destination) in transaction SE37

2. Confirm that it is created with the right gateway host and gateway service in SM59

3. Go to IDT and create a new connection.

4. Populate the message server

5. Populate the logon group (This is important if you are leveraging load balancing)

6. Select a table and activate it.


8. Activate the connection.

9. Go to Data Federation Administration and the configure Tab.

1. ProgramIDMapping (MYHOST.AdaptiveProcessingServer=DF_JCO_MYHOST)

2. GatewayServiceName

3. GatewayHostname

4. Save the connection

5. Restart the adaptive processing server as it may retain previous connections resulting in a “dead server state”.


Connecting directly to an application server in a load balanced configuration

1. Follow the steps outlined in the manual connection

2. In IDT, use the Application server radio button to enter the application server

If you intend to have an application server for administrative purposes do not include this server in the server group. Maintain it separately.


Note instead that the default automatic configuration mode works only with standard SAP install configurations. In some cases where a complex cluster of SAP servers is installed with load balancing capabilities, the automatic configuration mode may not identify correctly the cluster configuration or may not chose the desired or correct SAP gateway system to register the Data Federator server with. In such configurations where load balancing configuration was configured on the SAP


Potential Errors


This is an error connecting to BW credentials or authorizations are insufficient


Gateway connectivity errors

Could not start JCo Server. See the trace log file 'dev_jco_rfc.trc' for more details.
dev_jbo_rfc.trc can be found in the directory
    C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64
It will contain detailed information about the actual error.


This is basic configuration errors no gateway configured for the message erver

 GATEWAY Wiki and how to disable

Related Content

Wiki: Gateway security settings - extra information regarding SAP note 1444282

Wiki: Gateway Access Control Lists

Wiki: RFC Connections Mapping Scalability


Related Documents

The Configuration steps are documented in the Data Federation Administration Tool Guide.

Check out Scott Broadways Blog on Performance on Multisource Universe with SAP Netweaver BW

Related Notes

SAP Note 1316106 - Data Federator: Configuration of RFC

1601098 - How do you resolve "Could not generate a callback program ID ... Delete the unused RFC" when connecting to SAP NetWeaver BW via JCO

1604227 - Error Testing Relational connection to SAP BW system using the SAP Java Connector

1638647 - How to manually configure RFC destination for JCO connection

1781078 - How RFC/JCO (ProgramIDmapping) entry in Data Federation Administration Tool works in clustered Environment in BI 4.0?

1712546 - Error while quering BW table from IDT, BI4.0

1342398 - How do you activate the RFC Trace for troubleshooting SAP connectivity from BusinessObjects?'

1561226 - BI 4.0 - How to troubleshoot MultiSource universes

1847847 - BI 4.0 Data Federator: Error when opening an RFC connection

1702669 - BI 4 How To Increase The Number Of Concurrent Queries On JCO Connector

1897036 - BI4 Error Data Federator Driver Timeout

1892566 - JCo Server / Connect to SAP gateway failed / Error hostname unknown

2103286 - RSDRI_DF: Troubleshooting Data Federator problems in BW



  1. Former Member

    Nicely done Jacqueline; this sheds some light on the subject.



  2. Good work, thx.