Skip to end of metadata
Go to start of metadata

Below is a list of the errors returned by the SPRUNCONVERSION stored procedure and possible solutions.

FX-000 *ERROR* FX-000 Application not Available !
Appset maintenance in progress

FX-010 *ERROR* FX-010 Wrong Application, check your logic
You may have hardcoded a wrong application in your logic.

FX-020 *ERROR* FX-020 No Currency in your Appset ! You must have a Dimension with dimension type = #R# in your Application. !
You must have at least one member with CURRENCY_TYPE = R In your currency dimension.

FX-030 Warning : Application without INTCO dimension
No INTCO Dimension IN your Application.(Dimtype = I)

FX-040 Warning : Application without Flow Dimension
No FLOW Dimension IN your Application.(Dimtype = S)

FX-050 Warning : Application without Datasrc Dimension
No DATASRC Dimension IN your Application.(Dimtype = D)

FX-060 *ERROR* FX-060 No Local currency, You must have a currency with CURRENCY_TYPE Equal to L
You must have one member with CURRENCY_TYPE = L (Local currency) In your currency dimension.

FX-070 *ERROR* FX-070 No Entity available in your Application
You have to select a parameter which is not a parent.

FX-080 *ERROR* FX-080 No Time available in your Application
Check if in the TIME Dimension, you have the property "MONTHNUM"
Check if in the TIME Dimension, you have filled properly the property "MONTHNUM". The first Period of the Fiscal year must be 1, and then the second 2#.

FX-090 *ERROR* FX-090 Problem IN Category Dimension check properties.
Your parameter CATEGORY is not valid.

FX-100 *ERROR* FX-100 Problem IN Category OR Ratedim Dimension check properties.
Your parameter CATEGORY is not valid OR
You don' t have the Property FX-SOURCE_CATEGORY In your Exchange Rate Dimension (For Simulation) OR
The Exchange Rate id you chose doesn't exist.

FX-110 *ERROR* FX-110 Problem IN Category Or Categhory_for_ope check properties.
Your parameter CATEGORY is not valid OR
You don' t have the Property CATEGORY_FOR_OPE In your CATEGORY Dimension OR
You don' t have the Property RATE_CATEGORY In your CATEGORY Dimension OR
You don' t have the Property FX-DIFFERENCE_ONLY In your CATEGORY Dimension

FX-120 *ERROR* FX-120 Problem IN Category Or TIME.

FX-130 *ERROR* FX-130 No Group available.
Check if the selected group has the property CURRENCY_TYPE = "G".

FX-140 *ERROR* FX-140 No Currency available

FX-150 *ERROR* FX-150 Problem IN Ownership
Check if you have a base member equal to "METHOD" in the account dimension of the OWNERSHIP cube.
Check If you have valid information in the OWNERSHIP cube for the selected Category  Time.

FX-160 *ERROR* FX-160 No Entity available

FX-170 *ERROR* FX-170 No Entity Available

FX-180 *ERROR* FX-180 No Datasrc to be converted

FX-190 *ERROR* FX-190 No Rate Application

FX-200 *ERROR* FX-200 No Rate Extract From FactRate
No Rate found for the selected category and time.
Check If the Rateentiy you enter in the parameter is the Same as the one in the Rateentity Dimension
Check If the Rates in the Rate Cube are in the RATE Dimension with Property Ratetype equal to "FX" OR "FX Rate".

FX-210 Warning : No Rates found in the opening period

FX-220 *ERROR* FX-220 No Rate for reference currency
Check If you Pivot currency (The base currency to enter the rate, Rate = 1) is filled.

FX-230 *ERROR* FX-230 Problem in your Entity Dimension id from your Rate application
The Rateentity (Dimension from the Rate cube with Evdimtype = E) you chose does not exist

FX-240 *ERROR* FX-240 : No Rate Extract From MbrRate
No Rate in the RATE Dimension with Property Ratetype equal to "FX" OR "FX Rate".

FX-250 *ERROR* FX-250  No Rates found

FX-260 *ERROR* FX-260 No Rate in Fact corresponding with Rate dimension
Check If the Rates in the Rate Cube are in the RATE Dimension with Property Ratetype equal to "FX" OR "FX Rate".

FX-270 *ERROR* FX-270 No Formulas extract from FXTRANS
No Rate formulas in your Fxtrans Table.
        Check if the application name in the Logic.

FX-280 *ERROR* FX-280 No values found (T_FIN)
No values found for the selected Entities . Check if you have values in LC for the selected Entities OR
Check if the LC values are fro DATASRC with Property IS_CONVERTED not equal to "N"

FX-290 *ERROR* FX-290 No values found (Entity  - T_FINANCETMP)

FX-300 *ERROR* FX-300 No values found (CLCFXTRANS  - T_FINANCE)
No values found from FACT table for Account / Flow. Check if you have values in LC for the selected Account / Flow OR
Check our Fxtrans Table.

FX-310 *ERROR* FX-310 No values found (RATE  - T_DATA)
No account extracted have a corresponding Rate_formula in the Fxtrans table.

FX-320 *ERROR* FX-320 No values found (ENTITY - GROUPS - T_FINAL2)
Check your Ownership and your group_currency values.
SPRUNCONSO

CSD-000 *ERROR* CSD-000 Application not Available !
Appset maintenance in progress

CSD-010 *ERROR* CSD-010 No Subtables. Verify properties FLOW_TYPE, IS_INPUT, SEGNOINV, SUBTABLES_ORIG
No Flow available, check the flow dimension, you must have the property "FLOW_TYPE"

CSD-011 *ERROR* CSD-011 No instruction retrieved from the ELIM table
No instruction retrieved from ELIM Table.
Check If the Elim id in ELIM table Exist in the ELIMH Table.
Check if the Account in the ELIM Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST or value from property TYPELIM in the ACCOUNT Dimension)

CSD-012 *ERROR* CSD-012 No instruction retrieved from the ELIM Table : GROUP_ACC Problem
No instruction retrieved from ELIM Table. GROUP_ACC Problem
Check if the GROUP_ACC in the ELIM Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)

CSD-013 *ERROR* CSD-013 No instruction retrieved from the ELIM Table : MINO_ACC Problem
No instruction retrieved from ELIM Table. MINO_ACC Problem
Check if the MINO_ACC in the ELIM Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)

CSD-014 *ERROR* CSD-014 No instruction retrieved from the ELIM Table : EQUITY_ACC Problem
No instruction retrieved from ELIM Table. EQUITY_ACC Problem
Check if the EQUITY_ACC in the ELIM Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)

CSD-015 *ERROR* CSD-015 No instruction retrieved from the ELIM Table with FLOW Dimension
Check if the SUBTABLE_ORIG in the ELIM Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST in the FLOW Dimension)

CSD-020 *ERROR* CSD-020 No Currency in your Appset ! You must have a Dimension with dimension type = #R# in your Application. !
No Account extracted from CLCELIM Table, please check the Account from CLCELIM.
Check if the ACCOUNT in the ELIM Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)

CSD-030 *ERROR* CSD-030 No Entity Available
No Entity extracted. Check if you have the Property INTCO and the property CURRENCY in your ENTITY Dimension

CSD-040 *ERROR* CSD-040 No Account
No Account Extract from Account Dimension

CSD-050 *ERROR* CSD-050 No datasrc. Verify Properties DATASRC_TYPE,DATASRC_ORIG, IS_CONSOL
No Datasrc extracted.
Check if you have the Property "DATASRC_TYPE" and the property "IS_CONSOL" in your DATASRC Dimension

CSD-060 *ERROR* CSD-060 No Rules
No rules in your CLCRULES Table
Make sure the METHOD from the CLCRULES is not blank.
Make sure the I_METHOD from the CLCRULES is not blank.

CSD-070 *ERROR* CSD-070 No Time available
Check if in the TIME Dimension, you have the property "MONTHNUM"
Check if in the TIME Dimension, you have filled properly the property "MONTHNUM". The first Period of the Fiscal year must be 1, and then the second 2#.

CSD-080 *ERROR* CSD-080 No Group Available
Check if the selected group has the property CURRENCY_TYPE = "G".

CSD-090 *ERROR* CSD-090 Nothing Extracted From Ownership
Check if You have the property "IS_INPUT" in the Account dimension of the OWNESHIP Cube
Check if You have some base member from the Account dimension of the OWNESHIP Cube with IS_INPUT = "Y"
Check If you have valid information in the OWNERSHIP cube for the selected Category  Time.

CSD-100 Warning : Nothing Extract From Ownership for OPENING Period
Nothing extracted from Opening period in the Ownership cube.

CSD-110 *ERROR* CSD-110 No AccountOwn available
Check if You have the property "IS_INPUT" in the Account dimension of the OWNESHIP Cube
Check if You have the property "RATETPE" in the Account dimension of the OWNESHIP Cube
Check if You have some base member from the Account dimension of the OWNESHIP Cube with IS_INPUT = "Y"

CSD-120 *ERROR* CSD-120 No Entity - Method available
No data found in OWNERSHIP Cube for this method.
Check if you have METHOD in your ownership cube for the selected CATEGORY - TIME - GROUP

CSD-125 *ERROR* CSD-125 No Entity - Method available
No data found in OWNERSHIP Cube for this method.
Check if you have METHOD in your ownership cube for the selected CATEGORY - TIME - GROUP

CSD-130 *ERROR* CSD-130 Problem Extracting data from the Fact Table
No Values found
Check if You have Some Account from the ELIM Table.
Check if You have some DATASRC with IS_CONSOL = "Y"

CSD-135 *ERROR* CSD-135 Problem Extracting data - C_FINANCE
No Values found
Check the Account in the FACT Tables

CSD-140 *ERROR* CSD-140 Problem Extracting data  - C_DATA
No Values found
Check the Entity in the FACT Tables
Check the INTCO in the FACT Tables

CSD-145 *ERROR* CSD-145 Problem Extracting data  - C_DATA_ALL
No Values found for those Account And/Or Flow.
Check the DATASRC in the FACT Linked to the DATASRC_ORIG in the ELIMH Table.

CSD-150 *ERROR* CSD-150 Problem Extracting data  - C_REPART
No Values found for those rules.
Check the method between METHOD Table and your ownership Cube.
Check your Rules between the RULES Table and The ELIM Table.
Check The INTCO.

CSD-160 *ERROR* CSD-160 Problem Extracting data  - C_CONSOSPRUNCALC

CALC-000 *ERROR* CALC-000 Application not Available !
Appset maintenance in progress

CALC-010 *ERROR* CALC-010 Nothing Extract from CALCACCOUNT TABLE
Nothing Extracted from CALCACCOUNT Table, check the account, The account must be a as Base Member or an Aggregate or a Value in property DIMLIST or a value from property TYPELIM in the ACOUNT Dimension)

CALC-020 *ERROR* CALC-020 Nothing Extract from CALCACCOUNT TABLE   (FLOWS)
Nothing Extracted from CALCACCOUNT Table, check the Subtables, The Subtables must be a as Base Member or an Aggregate or a Value in property DIMLIST in the FLOW Dimension)

CALC-030 *ERROR* CALC-030 NoTime extract.
Check your TIME Dimension

CALC-040 *ERROR* CALC-040 NoTime extract for YTD
Check your TIME Dimension.
Check if in the TIME Dimension, you have the property "MONTHNUM"
Check if in the TIME Dimension, you have filled properly the property "MONTHNUM". The first Period of the Fiscal year must be 1, and then the second 2#.

CALC-050 *ERROR* CALC-050 NoEntity extract
Check your Parameter Entity, it must be an base member (Or a list of base member)  from the ENTITY Dimension

CALC-060 *ERROR* CALC-060 NoEntity extract
Check your Parameter Currency, it must be a base member (Or a list of base member)  from CURRENCY Dimension

CALC-070 *ERROR* CALC-070 NoEntity extract
No values found, check if you have something to calculate for the selected CATEGORY - TIME - CURRENCY
Check your CALCACCOUNT Table.
Check : The account must be a as Base Member or an Aggregate or a Value in property DIMLIST or a value from property TYPELIM in the ACOUNT Dimension)

CALC-080 *ERROR* CALC-080 NoEntity extract
No Values found.
Check your CALCACCOUNT Table.
Check : The SUBTABLES must be a as Base Member or an Aggregate or a Value in property DIMLIST in the FLOW Dimension)
SPCOPYCATEGORY

CCAT-000 *ERROR* CCAT-000 Application not Available !
Appset maintenance in progress

CCAT-010 *ERROR* CCAT-010 No Time available in your Application
Check your Parameter "Time".

CCAT-020 *ERROR* CCAT-020 Nothing extracted from the Account Dimension
Check the property in the parameter.
Check that this property is in the ACCOUNT Dimension

CCAT-030 *ERROR* CCAT-030 No Entities available
Check your Parameter "Entity".

CCAT-040 *ERROR* CCAT-040 No Currency available
Check your Parameter "Currency".

CCAT-050 *ERROR* CCAT-050 No data found
No data found, check if you have data for the selected CATEGORY - TIME - CURRENCY
SPCOPYOPENING

COPYO-000 *ERROR* COPYO-000 Application not Available !
Appset maintenance in progress

COPYO-010 *ERROR* COPYO-010 No Datasrc Available
Check if you have Datasrc with DATASRC_TYPE different from "A"
Check if COPYOPENING Property is equal to Y

COPYO-020 *ERROR* COPYO-020 Nothing extracted from COPYOPENING TABLE
Check your COPYOPENING TABLE

COPYO-030 *ERROR* COPYO-030 No Time available
Check your Parameter "Time".

COPYO-040 *ERROR* COPYO-040 No category available
Your parameter CATEGORY is not valid OR
You don' t have the Property CATEGORY_FOR_OPE In your CATEGORY Dimension OR
You don' t have the Property OPENING_YEAR In your CATEGORY Dimension OR
You don' t have the Property OPENING_PERIOD In your CATEGORY Dimension

COPYO-045 *ERROR* COPYO-045 No category available
Your parameter CATEGORY is not valid

COPYO-050 *ERROR* COPYO-050 Problem in COPYOPENING Properties
Check Opening_year and / Or  Opening period properties in CATEGORY Dimension.

COPYO-060 *ERROR* COPYO-060 No Entities available
Check your Parameter "Entity".

COPYO-070 *ERROR* COPYO-070 No Currency available
Check your Parameter "Currency".

COPYO-080 *ERROR* COPYO-080 No Account available
Check your COPYOPENING Table
Check if the Account in the COPYOPENING Table Exist. (as Base Member or as Aggregate or as Value in property DIMLIST or value from property TYPELIM in the ACCOUNT Dimension)

COPYO-090 *ERROR* COPYO-090 No Data found
Check if you have data for the selected CATEGORY - TIME - GROUP
SPRUNVALID

VALID-000 *ERROR* VALID-000 Application not Available !
Appset maintenance in progress

VALID-010 *ERROR* VALID-020 Nothing extracted from VALIDATION TABLE
Check your VALIDATION TABLE

VALID-020 *ERROR* VALID-020 Nothing extracted from VALIDATION_H TABLE
Check your VALIDATION_H TABLE

VALID-030 *ERROR* VALID-030 Wrong Application, check your logic
You may have hardcoded a wrong application in your logic.

VALID-040 *ERROR* VALID-040 No Datasrc available
Check your Parameter "DATASRC".

VALID-050 *ERROR* VALID-050 No Time available
Check your Parameter "Time"
.
VALID-060 *ERROR* VALID-060 Nothing extracted from VALIDATION - VALIDATION_H Table
Check your VALIDATION TABLE
Check your VALIDATION_H TABLE
Check the validation ID in VALIDATION and VALIDATION_H Table.

VALID-070 *ERROR* VALID-070 No Data found
Check if you have data for the selected CATEGORY - TIME - GROUP

VALID-080 *ERROR* VALID-080 No Data found for the selected period
Check your PERIOD Property in the VALIDATION_H Table

  • No labels