Page tree
Skip to end of metadata
Go to start of metadata
Configuration Errors (5800s)

5803      10           Unknown config number in sysconfigures, config = %d.
5804      16           The value for '%s' must not exceed '%s' or '%s'.
5805      16           Warning: The next configuration change will overwrite '%s'. To avoid this rename, move, or delete old configuration files. See System Administration Guide for details.
5806      16           Warning: The file '%s' has been overwritten. To prevent this rename, move, or delete old configuration files. See System Administration Guide for details.
5807      10           Invalid memory move request encountered for the '%dK' pool in cache '%s'. Move should equal at least 1 buffer of size '%dK'.
5808      10           WARNING: Dynamic loading of caches and pools through loading a new file are not supported. However, the loadfile '%s' will be inspected for consistency.
                             Refer to 'sp_cacheconfig' and 'sp_poolconfig' to create or alter pools and caches.
5809      16           Less memory moved than requested in cache %s cache. Requested size = %d kb from pool %d, actual memory moved = %d kb.
5810      16           new (%d) buffer pool of size %d for cache %s is being created
5811      16           The new load file does not have the cache %s definition. Cache type, size and number of caches should match the running values.
                             Use sp_cacheconfig to determine the running value
5812      16           The new load file has %d caches defined against running %d cache definitions.Cache type, size and number of caches should match the running values.
                             Use sp_cacheconfig to determine the running value.
5813      16           The new load file has duplicate %s cache definitions, caches should be uniqueue.
5816      16           Legal values for the number of remote logins are 0 or positive numbers.
5817      16           Legal values for the number of remote sites are 0 or positive numbers.
5818      16           Legal values for the number of remote connections are 0 or positive numbers.
5819      16           Legal values for the number of pre-read packets per remote connection are 0 or positive numbers.
5820      16           Number of remote logins should be greater than the number of remote sites.
5821      16           Number of remote connections should be greater than the number of remote sites.
5822      16           Version number should be between 0 and 10000.
5824      16           Cannot reconfigure server to use sort order ID %d, because the row for its underlying character set (ID %d) does not exist in syscharsets.
5825      16           Cannot reconfigure the server's sort order since the syscharsets table does not exist.  You must upgrade your server prior to attempting this.
5826      10           You have just reconfigured ASE's default sort order. System table indexes will be rebuilt when you reboot ASE.
5827      10           In changing the default sort order, you have also reconfigured ASE's default character set.
5828      16           Legal values for number of user connections are 1 through %d.
5829      16           Do not recommend more than %d engines on-line.  Use override option to force this option.
5830      16           Must configure with at least %d engine(s) on-line.
5831      16           Cannot reconfigure the server's character set with out of bounds character set ID %d.
5832      10           The stack size must be a multiple of the page size. It has been rounded from %d to %d.
5833      16           Cannot reconfigure the server with an out-of-bound, illegal value for Systemwide Password Expiration Interval.
5835      16           Cannot reconfigure the server with an out-of-range audit queue size.  The valid range is %d to %d inclusive.
5836      10           The additional network memory size must be a multiple of 2048 bytes. It has been rounded down from %d to %d.
5837      10           The default network packet size must be a multiple of 512. It has been rounded down from %d to %d.
5838      10           The maximum network packet size must be a multiple of 512. It has been rounded down from %d to %d.
5839      0             The value of 'max network packet size', '%d', must be greater than or equal to the value of the 'default network packet size', '%d'.
5840      0             Illegal value (%d) specified for the number of large extents.
5841      16           Cannot reconfigure the server's sort order with an out of bounds sort order set ID %d.
5842      16           Number of cleanup blocks should be at least as great as the number of users. The number of users currently configured is %d.
5843      0             Invalid Configuration: Cache alignment '%d' is invalid. Alignment must be a power of 2 greater than or equal to 2048. Retry the command with a legal value.
5844      16           Cannot reconfigure the auto identity column size to be %d because the minimum precision of a numeric is 1.
5845      16           Invalid value configured for lock promotion threshold = %d. Configured value must be greater than or equal to %d.
5846      0             Illegal value '%d' specified for configuration option '%s'. The legal values are between '%d' and '%d'.
5847      16           Configuration Error: Configuration file '%s' does not exist or you do not have the required read/write permission for the file.
5848      0             Warning: Unknown parameter '%s' found on line '%d' of configuration file '%s'. This parameter is ignored. Edit the configuration file to remove or correct this parameter.
5849      16           Verification failed for parameter '%s'.
5850      16           Notification failed for parameter '%s'.
5851      16           Configuration Error: Configuration file '%s' has an unknown format on line %d.
5852      16           Changing the value of '%s' is not allowed since it is a static option.
5853      0             %s' has been modified from '%d' to '%d' by the verification routine.
5854      18           Configuration Error: Cannot %s file '%s' due to system error '%s' (status = %d).
5855      16           Cannot change any of the configuration parameters since the 'sysconfigures' table was not updated during startup.
5856      16           The configuration parameter '%s' can only be changed via the stored procedure 'sp_configure'.
5857      0             Changing the value of '%s' is not allowed since its value is calculated or is read only.
5858      0             The configuration option '%s' has been changed by '%s' from '%d' to '%d'.
5859      16           The configuration number '%d' is invalid.
5860      18           Invalid datatype encountered for parameter '%s'.
5861      0             The current 'max memory' value '%d', is not sufficient to change the parameter '%s' to '%d'.
                             'max memory' should be greater than 'total logical memory' '%d' required for the configuration.
5862      18           Invalid portion encountered.
5863      18           Invalid group encountered.
5864      0             Invalid option encountered in '%s'.
5865      18           error in os_get_cpu_count: %d
5866      10           Configuration file '%s' has been written and the previous version has been renamed to '%s'.
5867      16           The wash size for the %dk buffer pool in cache %s has been incorrectly configured. 
                             It must be a minimum of %d buffers and a maximum of %d percent of the number of buffers in the pool.
5868      16           Invalid type configured for cache %s. Cache type may be one of mixed OR log only but NOT both.
5869      16           Invalid buffer size of %dk for cache %s. Valid buffer sizes are powers of 2 between %dk and %dk inclusive.
5870      16           An invalid buffer size of %dk was encounterd in cache %s. Valid buffer sizes for caches are powers of 2 between %dk and %dk inclusive.
5871      16           Invalid pool size of %dk (%d buffers) encountered for the %dk pool in cache %s. Buffer pools must have a minimum total size of %dk or %d buffers, whichever is greater.
5872      16           The total size of the configured pools (%dk) in cache %s is greater than the total size (%dk) of the cache.
5873      16           Invalid configuration for the default %dk pool in cache %s. The default %dk pool must be a minimum of %dk.
5874      16           The total size of all configured caches (%dk) is greater than the memory available for caches (%dk).
5875      16           The cache type for the default data cache cannot be modified.
5876      16           Multiple pools containing buffer sizes of %dk encountered in cache %s. Buffer sizes in a cache must be unique.
5877      16           Bad alignment value of %d encountered. Valid cache alignment values are powers of 2 in between %dK and %dK inclusive. The units of this value are in bytes.
5878      14           Permission denied. Only users with role '%.*s' can change configuration option '%s'.
5879      0             The 'reconfigure' command is no longer needed and supported since its functionality has been migrated into the 'sp_configure' command.
                             Please refer to the Reference Manual for details.
5880      16           Warning: The operating system setting for file descriptors, %d, is not large enough to configure 'user connections' to %d, 'devices' to %d, and 'remote sites' to %d.
5881      0             The value of 'default network packet size', '%d', must be less than or equal to the value of the 'max network packet size', '%d'.
5882      16           A cache alignment factor of %dk was specified but no buffer pool containing %dk buffers has been configured. 
                             An attempt will be made to create this pool with extra memory (%dk bytes) from cache %s.
5883      0             The value of 'number of locks', '%d', is not enough to configure 'user connections' to '%d'. 'number of locks' should be at least twice the value of 'user connections'.
5884      10           %s
5885      0             The '%slock promotion HWM'= '%d' cannot be less than '%slock promotion LWM' = '%d'.
5886      0             The '%slock promotion LWM'= '%d', cannot be greater than the '%slock promotion HWM'= '%d'.
5887      16           Configuration Error: Duplicate Named Cache '%s' found around line '%d' in the configuration file.
5888      16           Configuration Error: Two Named Caches with the 'cache status' defined as 'default data cache' is not allowed.
5889      16           Configuration Error: Unknown cache status '%s' defined for cache '%s'.
5890      16           Configuration Error: A Named Cache with 'cache status=default data cache' does not exist in the configuration file.
5891      16           Named cache '%s' has been configured too small. The minimum size of a named cache is %d Kilobytes.
5892      16           You cannot use 'allow sendmsg' option because syb_sendmsg() builtin is not supported on this platform.
5893      16           The sum, (%s) + (%s %s) + (%s) + (%s) + (%s) + (%s), must be no greater than '%d'.
5894      16           Configuration Error: Duplicate pool size definition of '%s' for Named Cache '%s'.
5895      16           Configuration Error: Duplicate wash size definition of '%s' for Named Cache '%s'.
5897      16           The Adaptive Server Enterprise Express Edition does not allow you to set this configuration parameter to a value higher than %d.
5898      0             WARNING!!! %dK buffer pool has been deleted. The log I/O size for the following databases have been set to %dk.
                             You must change the log I/O size to an existing pool size.
5899      16           The value of the 'max memory' parameter (%d) defined in the configuration file is not high enough to set the other parameter values specified in the configuration file.

  • No labels