No new writeups yet.
10301 14 Can't find database id for '%.*s'. Check that this database exists and re-run the command.
10302 14 Only the DBO of database '%S_DBID' or a user with System Administrator (SA) role can run this command.
10303 14 Object named '%.*s' not found; check sysobjects.
10304 14 Only the owner of object '%S_OBJID' or a user with '%.*s' role can run this command.
10305 14 Datatype named %.*s not found in database '%.*s'; check systypes.
10306 14 You do not have the permission to use datatype named %.*s in database %.*s.
10307 14 Curread should dominate the label being used.
10308 14 Supplied label is invalid.
10309 14 Curwrite is not equal to the label at which write is attempted.
10310 14 Session labels dominance relationship has been violated by the label being used.
10311 14 You must use one of the SAP-supplied auditing stored procedures to change audit options.
10312 14 The ad_hoc_audit builtin can only be called from the following stored procedures:
sp_addauditrecord, sp_bindmsg, sp_unbindmsg, sp_bindefault, sp_unbindefault, sp_bindrule, sp_unbindrule, sp_addmessage, sp_dropmessage.
10313 14 The caller of the set_password builtin was not found! Password left unchanged.
10314 14 Only a person with System Security Officer (SSO) role can change another person's password.
10315 14 Invalid caller's password specified, password left unchanged.
10316 14 New password supplied is the same as the previous password. Please supply a different new password.
10317 14 The specified password is too short. Passwords must be at least %d character(s) long.
10318 14 Invalid user specified, password left unchanged.
10319 14 SET ROLE fails. The caller is not granted with the specified role. Please contact a user with System Security Officer (SSO) role for help.
10320 14 SET ROLE fails. The caller cannot assume the new user identity (uid) in the current database. Please contact a user with System Security Officer (SSO) role for help.
10321 14 Ad-hoc updates to system catalogs not enabled. A user with System Security Officer (SSO) role must reconfigure system to allow this.
10322 14 In a CREATE SCHEMA statement, the authorization id must match the current user name. The supplied authorization id, '%.*s', does not match the current user name, '%.*s'.
10323 14 You do not have the permission to use datatype id %d in database id %d.
10324 14 User '%.*s' not found in database '%S_DBID'.; check sysusers.
10325 14 Database named %.*s not found; check sysdatabases.
10326 14 Suspect object %S_OBJID, database %S_DBID found. Cannot execute query.
10327 14 Procedure %S_OBJID, database %S_DBID with labels found UNCERTIFIED. Cannot execute query.
10328 14 UNCERTIFIED object %S_OBJID, database %S_DBID accessed by CERTIFIED object %S_OBJID, database %S_DBID. Cannot execute query.
10329 14 Sysobjects entry NOT found for procedure buffer entry.
10330 14 %s permission denied on object %S_OBJID, database %S_DBID, owner %.*s
10331 14 Permission denied, database %S_DBID, owner %.*s. You need the following permission(s) to run this command: %s.
10332 14 %s permission denied on column %.*s of object %S_OBJID, database %S_DBID, owner %.*s
10333 14 Incorrect DBCC command: Please see the Commands Reference Manual for DBCC commands and options.
10334 14 Permission related internal error was encountered. Unable to continue execution.
10335 14 SET label (CURREAD, CURWRITE) failed because new value is an invalid label, or new value doesn't satisfy the dominance relationships among session labels.
10336 14 Permission denied. Only the Database Owner (DBO) or a user with the System Administrator (SA), System Security Officer (SSO),
or Oper role can execute this command for database '%S_DBID'.
10337 16 Object '%S_OBJID' not found.
10338 14 Permission denied. User's curwrite does not match the sensitivity label of object '%S_OBJID'.
10339 16 Database '%S_DBID' not found.
10340 14 Permission denied. User's curwrite does not match the sensitivity label of database '%S_DBID'.
10341 14 Only users with SA and SSO roles can run this dbcc dbrepair command for the database %S_DBID.
10342 14 Only users with SA and SSO roles can run this dbcc dbrepair command for the database %S_DBID.
10343 14 Permission denied. Only a user with curwrite set to @@data_low can perform the command '%.*s'.
10344 14 Permission denied. Only a user with curwrite set to @@data_high can perform the command '%.*s'.
10345 14 Permission denied. The user cannot insert into the object '%S_OBJID'.
10346 14 Permission denied. The user cannot insert into the object '%S_DBID'.
10347 14 Permission denied. The subject cannot see all the contents of the container object '%S_OBJID'.
10348 14 Permission denied. The subject cannot see all the contents of the container object database '%S_DBID'.
10349 14 Permission denied. Only a user with curread set to @@data_high can perform the command '%.*s'.
10350 14 Permission related internal error was encountered. Unable to continue execution.
10351 14 Server user id %d is not a valid user in database '%.*s'
10352 14 You can only use SELECT or SELECT INTO with the special table.
10353 14 You must have any of the following role(s) to execute this command/procedure: '%.*s' . Please contact a user with the appropriate role for help.
10354 14 Permission denied. You must be either the system administrator (SA), the database administrator (dbo), or the owner of this object to perform this operation.
10355 16 Changing certification state of object %S_OBJID, database %S_DBID to SUSPECT because of change in state of dependent object %.*s (previous object id %d),
database %S_DBID.
10356 14 Illegal datatype encountered; check systypes.
10357 14 Permission denied. User's curwrite does not match the sensitivity label of datatype named '%.*s' in database '%.*s'.
10358 14 Curread cannot be set below the current database's hurdle.
10359 18 The curread and curwrite labels of the Client do not equal the connection level for the remote Server.
10360 18 Site '%.*s' not found in sysservers.
10361 14 The attrib_notify() function can only be used from a system stored procedure or with ad hoc updates enabled.
10362 14 The logschema() built-in function can only be called from the following stored procedures: sp_rename, sp_setreplicate, sp_setreptable, sp_setrepproc.
10363 14 The built-in function '%.*s' can only be called from system stored procedures.
10364 14 Permission denied. You must either be the database/object owner or possess any of the following roles in order to perform this operation: '%.*s'.
10365 14 Permission denied. You must have '%s' access on the table to lock it in '%s' mode.
10366 14 System catalog updates are not allowed in transactions with %s as coordinator.
10367 16 Permission denied on the %s ACF built-in.
10368 16 Set session authorization permission denied because the target login has a role that you do not have and you have been restricted from using.
10369 14 Permission denied. You must be either the database or the object owner or have %.*s to perform this operation.
10370 14 Permission denied. Only the DBO of the current database or a user with sso_role can modify the owner of an object/user-defined type.
10372 14 Permission denied. Only the key owner or a user with sso_role can modify the encryption key ownership.
10373 14 Permission denied. DBO cannot modify the ownership of objects concretely owned by DBO.
10376 14 %s permission denied on database '%.*s'. User must have '%s' privilege or be the owner of the template database '%S_DBID'.
10377 14 ALTER DATABASE permission denied on database '%.*s'. User must be the owner of the new template database '%S_DBID'.
10378 16 Tables referenced by a row-filtering or activation predicate may not in turn require predicated access.
10379 16 An object with id %d in database %d referenced by a row-filtering or activation predicate no longer exists.
10380 14 Role '%.*s' has not been set on in the current session because its activation predicate returned FALSE.
10381 16 Command fails because a row-filtering predicate with object id %S_OBJID, database id %S_DBID is incompatible with the current database schema or server options.
The administrator must revoke and redo the predicated grant
10383 16 The builtin %s is for Adaptive Server internal use and may not be included in the predicate of a GRANT or GRANT ROLE statement.
10384 14 Permission denied. You must have any of the following privilege(s) to execute this command/procedure: '%.*s'.
10385 14 Permission denied. You must have all of the following privilege(s) to execute this command/procedure: '%.*s'.
10386 14 %s permission denied on %.*s, owner %.*s
10387 16 You may not use the GRANTED BY option to GRANT or REVOKE permissions you received through the WITH GRANT OPTION.
10388 16 You must be in the master database to grant a role with an activation predicate
10389 14 Permission denied. You must be the object owner to replace the definition of '%.*s'.
10390 16 User '%.*s' is not authorized to use command '%s'.