No new writeups yet.
9201 20 %S_REPAGNT: Could not map OAM Page (%u) to object id, current marker (%u, %d).
9202 20 %S_REPAGNT: Nested replicated stored procedure detected. Transaction log may be corrupt. Please contact SAP Technical Support. (current marker = %d, %d)
9203 20 %S_REPAGNT: Encountered an End Transaction that was not in abort state while locating after image for Delete at (%d, %d), transaction = (%d, %d).
9204 20 %S_REPAGNT: Could not locate schema for object with id = (%d), current marker (%d, %d).
9205 20 %S_REPAGNT: A replicated End Stored Procedure Execution log record was found without a Begin. Transaction log may be corrupt.
Please contact SAP Technical Support. objid = (%d), current marker = (%d, %d)
9206 20 %S_REPAGNT: Error initializing the Rep Agent. Could not set affinity to engine (%d).
9207 20 %S_REPAGNT: Could not re-read XCMDTEXT log record at (%d, %d), current marker (%d, %d).
9208 20 %S_REPAGNT: Update detected within a subscribable function. Transaction log may be corrupt. Please contact SAP Technical Support. (current marker = (%d, %d)).
9209 20 %S_REPAGNT: Missing datarow in TEXT/IMAGE/UNITEXT insert log record. Transaction log may be corrupt.
Please contact SAP Technical Support. (current marker = (%d, %d)).
9210 20 %S_REPAGNT: Fatal error from CT-Lib. (CT-Lib command = %s, return status = %d).
9211 20 %S_REPAGNT: Received the following error message from the Replication Server: Msg %d. %.*s.
9212 20 %S_REPAGNT: Received the following communications error message: Msg %s: %.*s.
9213 16 %S_REPAGNT: The version of this Rep Agent, is not supported by the Replication Server specified.
After fixing this problem, restart the Rep Agent for this database. (Rep Agent version = %d, Rep Server version = %d, Rep Server = %.*s).
9214 16 %S_REPAGNT: Failed to connect to Replication Server. Please check the Replication Server, username, and password
specified to sp_config_rep_agent. RepSvr = %.*s, user = %.*s).
9215 16 %S_REPAGNT: The Secondary Truncation Point is not valid. Please make sure that the Secondary Truncation Point is valid, and
then restart the Rep Agent Thread for this database.
9216 10 %S_REPAGNT: The Rep Agent Thread will retry the connection to the Replication Server every %d second(s). (RepSvr = %.*s).
9217 10 %S_REPAGNT: Trace log file set to `%s'.
9218 16 Database %S_DBID has not been enabled yet for an integrated Rep Agent Thread. Run sp_config_rep_agent to enable Rep Agent in the database.
9219 20 %S_REPAGNT: Internal coding error.
9220 16 %S_REPAGNT: The Rep Agent Thread context for database %S_DBID has already been reserved by another session.
9221 16 Parameter count/type mismatch. Please check the number and types of the parameters passed to the builtin function, '%.*s'.
9222 16 You must be SA, DBO, or have REPLICATION role to execute the builtin function, '%.*s'. Please check your current roles.
9223 16 Unknown operation, '%.*s', specified to builtin function rep_agent_admin(). Please check parameter spelling and placement.
9224 16 Unknown category, '%.*s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement.
9225 16 Unknown property, '%.*s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement.
9226 16 Database %S_DBID has already been enabled to use a Rep Agent thread.
9227 17 %S_REPAGNT. Could not allocate memory to spawn Rep Agent thread. (size=%d)
9228 17 %S_REPAGNT. Could not spawn Rep Agent Thread.
9229 16 %S_REPAGNT. Could not change to database, %S_DBID.
9230 16 The Rep Agent Thread for database, %S_DBID, is not running. Please retry this command after starting the Rep Agent Thread for this database.
9231 16 %S_REPAGNT. The Connect Dataserver name was not specified via 'sp_start_rep_agent', nor was it found in sysattributes, or sysservers.
Make sure that you have done a 'sp_addserver <svr>, local'.
9232 16 %S_REPAGNT. The Connect Database name was not found in sysattributes, or sysdatabases.
9233 17 %S_REPAGNT. Could not allocate %d bytes from the procedure cache. Please retry the last operation when more memory is available, or
re-configure the server with a larger procedure cache.
9234 17 %S_REPAGNT. Could not start Rep Agent Thread.
9235 17 Could not allocate memory for gettrunc. Please retry gettrunc() later when more memory is available, or re-configure the server with a larger procedure cache.
9236 11 Unknown dbid '%d' specified. Please check the dbid specified.
9237 16 %S_REPAGNT. The row for %.*s could not be found in sysattributes. Please check the configuration properties for this
database with 'sp_config_rep_agent' or 'sp_help_rep_agent'.
9238 16 Settrunc() is not permitted when a Rep Agent Thread is currently running on the database.
9239 17 %S_REPAGNT: Could not allocate a Procedure Cache for the Rep Agent Thread. Try restarting the Rep Agent Thread after freeing up, or allocating a larger Procedure Cache.
9240 17 %S_REPAGNT: Could not allocate an alarm. Try restarting this Rep Agent Thread after freeing up some alarms, or restart the server with more alarms allocated.
9241 20 %S_REPAGNT: Failure initializing the Rep Agent Context.
9242 20 %S_REPAGNT: Underflow or overflow of state stack occurred.
9243 20 %S_REPAGNT: Interface error with the Replication Server. The Rep Agent may not be compatible with the Replication Server.
9245 20 Failure during update/insert/delete from sysattributes.
9249 17 Failed to reserve context in shared mode.
9250 10 %S_REPAGNT Failed to open trace file, '%.*s'. Trace messages will go to stdout of the server.
9251 20 %S_REPAGNT Write to trace file, '%.*s', failed
9252 20 Internal coding error in builtin function, '%.*s'.
9253 20 Failed to get secondary truncation point.
9254 20 %S_REPAGNT: Could not locate schema version for object id '%d' in the transaction log.
9255 20 %S_REPAGNT: Rewrite of PREPARE log record failed at (%d, %d).
9256 20 %S_REPAGNT: Could not read INOOP log record at (%d, %d), current marker (%d, %d).
9257 20 %S_REPAGNT: Could not read ROWIMAGE log record at (%d, %d), current marker (%d, %d).
9258 20 %S_REPAGNT: Could not re-read EXECBEGIN log record at (%d, %d), current marker (%d, %d).
9259 20 %S_REPAGNT: Could not read TEXTINSERT/INOOPTEXT log record at (%d, %d), current marker (%d, %d).
9261 20 %S_REPAGNT: This Rep Agent Thread is aborting due to an unrecoverable communications or Replication Server error.
9262 16 A Rep Agent Thread for database '%.*s' (dbid=%i) is already running.
9263 10 %S_REPAGNT: Turning Batch mode on.
9264 10 %S_REPAGNT: Turning Batch mode off.
9265 10 %S_REPAGNT: Ignoring LTL errors.
9266 10 %S_REPAGNT: Error in passthru packet: '%.*s'.
9267 20 %S_REPAGNT: A security mechanism was specified, but no security service(s) were specified. Please use 'sp_config_rep_agent' to specify
which security service(s) to use when connecting to the Replication Server.
9268 20 %S_REPAGNT: The security service '%.*s' was specified, but it is not supported by the security mechanism.
Please check the security service(s) and/or security mechanism specified to sp_config_rep_agent. (CT-lib error %d).
9269 20 %S_REPAGNT: Failure initializing the security mechanism '%.*s'. Please check the 'security mechanism' specified to sp_config_rep_agent. (CT-lib error %d).
9270 10 %S_REPAGNT: Using default security mechanism.
9271 20 %S_REPAGNT: Failure initializing the default security mechanism. Please check that a security mechanism has been properly configered. (CT-lib error %d).
9272 20 %S_REPAGNT: Failure specifying the keytab filename. Please check that the keytab file '%.*s', exists and is accessable. (CT-lib error %d).
9273 10 %S_REPAGNT: Using default keytab file because security mechanism requires a keytab file, but the no keytab file was specified at server startup.
9274 16 Cannot disable the RepAgent thread for database %S_DBID, because the RepAgent is still running.
Please stop the RepAgent on that database with 'sp_stop_rep_agent' before re-issuing 'sp_config_rep_agent disable'.
9275 20 %S_REPAGNT: Could not locate the %s image for the %s log record at (%d,%d).
9276 20 Error executing the command 'set proxy %.*s'.
9277 20 %S_REPAGNT: The security mechanism configured requires a keytab file. Check that the a keytab file was specified at server startup,
and that 'use security services' has been configured.
9278 0 %S_REPAGNT: Encountered a feature that cannot be supported by the current Replication Server version. Upgrade the Replication Server
version to a higher level, or use sp_config_rep_agent to set the 'skip unsupported features' option.
9279 0 %S_REPAGNT: Connecting to a Replication Server that supports a lower LTL version. Features that are not supported by the lower LTL version may
cause the RepAgent to shutdown. Set the 'skip unsupported features' configuration option to prevent shutdown.
9280 10 %S_REPAGNT: Unable to start RepAgent on database %S_DBID, because that database has not been recovered and/or is not online.
Please start the RepAgent manually using sp_start_rep_agent when it is ready.
9281 10 %S_REPAGNT: The Replication Server LTL version should be at least %d for full support of features. (Replication server LTL version %d, Rep Agent LTL version %d).
9282 20 %S_REPAGNT: No free file descriptors available.
9283 20 %S_REPAGNT: Aborting because a cross database stored procedure execution was detected. This event needs to be manually applied, and
skipped before restarting the RepAgent. (sproc dbid %d, sproc objid %d, current marker (%d, %d))
9284 17 %S_REPAGNT. Cannot allocate %d bytes of memory. You may need to reconfigure the parameter 'replication agent memory size' with more memory.
9285 19 %S_REPAGNT. The data or object identifier at (%d, %d) is truncated because the Replication Server, '%.*s', cannot handle wide data or large identifiers.
Check the 'data limits filter mode' configuration parameter.
9286 19 %S_REPAGNT. The data or identifier for object id (%d) at (%d, %d) is too wide for the Replication Server, '%.*s', to handle.
Check the 'data limits filter mode' configuration parameter.
9287 19 %S_REPAGNT. The data at (%d, %d) is skipped because it contains data or object identifiers wider than the Replication Server, '%.*s', can handle.
Check the 'data limits filter mode' configuration parameter.
9288 10 %S_REPAGNT. The date column at (%d, %d) is too small to be converted to a datetime, the date portion will default to 'Jan 1, 1900'.
9289 20 %S_REPAGNT. Log record (%d, %d) for object = %d contains inconsistent data. Transaction log may be corrupt. Please contact SAP Technical Support.
9290 18 %S_REPAGNT. Log record (%d,%d) for object = %d contains inconsistent data. Rep Agent will try to extract the information read and continue replication.
Unexpected data may be replicated.
9291 16 Replication Agent configuration parameter '%s' must be in the range %d to %d.
9292 10 %S_REPAGNT: Delay %d seconds before starting replication agent.
9293 10 %S_REPAGNT. Starting recovery, processing log records between (%d, %d) and (%d, %d).
9294 10 %S_REPAGNT. Processed %d log records.
9295 10 %S_REPAGNT. Processed %d log records, recovery complete.
9297 16 %S_REPAGNT. Cannot bind Rep Agent to engine number %d as the engine is currently offline. Rep Agent will continue running on the next available engine.
9298 20 The generation number cannot be automatically set, because the locater in Replication Server is zero. Use DBCC SETTRUNC('ltm','gen_id',<number>) to
manually increase the generation number. Then restart Replication Agent.
9299 20 The generation number cannot be automatically set, because Replication Agent has reached the maximum value of 65534. Please contact SAP Technical Support.